Operation Manual

Cycle Hub shifting systems

NOTE

An incorrectly adjusted gear shifting system can cause damage

to the system itself.

Risk of damage!

x Adjust the gear shifting system.

x If you lack the necessary expertise or the tools required,

contact your dealer.

Adjustments to hub shifting systems may only be carried out by your dealer.

7.2.1 Adjusting the shift cable tension

Shift cable tension adjustment is dependent on the model of your hub shifting system.

x Check what hub shifting system is installed on your cycle (see the specifications

data sheet provided by the dealer).

x If the functionality of the hub shifting system declines, adjust the shift cable tension.

1. Adjust the twist-grip control or shift lever

to the middle gear setting. In a 7 or

8-speed system, this corresponds to

4th gear (see “Illustr.: Adjustment screw

on the twist-grip control”).

2. Adjust the twist-grip control adjustment

screw (see “Illustr.: Adjustment screw on

the twist-grip control”) so that the two

coloured markings on the rear wheel

hub match up (see “Illustr.: Adjustment

marking”).

3. Check the adjustments with a test ride.

x If you were unable to rectify the

malfunction, have the shift cable

tension adjusted by your dealer.

Illustr.: Adjustment screw on the twist-grip

control (example)

1 Gear level

2 Adjustment screw

Illustr.: Adjustment marking (example)