Operation Manual

Cycle Hub shifting systems

7 Hub shifting systems

7.1 Basics

Usually all modern cycles have a gear shifting

system installed; this depends on the cycle

model. Exceptions include children’s bikes,

which may only have one gear depending on

the model.

The gear shifting system on a cycle consists

of a variable gear unit and the corresponding

controls. As a result, the power provided by

the rider is adapted to suit the riding speed

and route conditions.

Adjustments to the gear shifting system

require expertise.

x If you lack the necessary expertise and

the tools required to adjust the hub

shifting system, contact your dealer.

7.1.1 Automatic shifting system (Automatix)

This chapter applies to models with an optional “Automatix” gear shifting

system (see the specifications data sheet provided by the dealer).

The rear wheel hub is equipped with an automatic shifting system. The gear shifting

system automatically shifts up to 2nd gear or down to 1st gear depending on your speed.

Automatix gear shifting systems are available both with a freewheel and with a coaster

brake. Check the data sheet completed by your dealer to find out which variant is

installed.

x If the gear shifting system does not shift gear automatically, or produces noises,

have the system checked by your dealer.

Illustr.: Components of a hub shifting system

(example)

1 Fastening ring

2 Ratchet

3 Holder