Operation Manual

CycleSafety
32
3.8.3 Torques
Specific torques must be observed for screw joints in carbon components. Permitted
torques can be found on the respective components. Excessively high torques may result
in damage that is difficult to see. Components can break or change and cause falls.
x Refer to the fitting information enclosed by the manufacturer.
x If you lack the necessary expertise and the tools required, have torques adjusted
and checked by your dealer.
3.9 Residual risks
Even if all safety notes and warnings are observed, using the cycle still entails
unforeseeable risks such as:
– Incorrect behaviour by other road users
– Unforeseeable road conditions e.g. slipperiness due to black ice
– Component breakage or failure due to unforeseeable material defects or material
fatigue
x Ride defensively, looking ahead and anticipating.
x Check the cycle for cracks, discolouration or damage before every ride.
x Test the functionality of safety-related components such as the brakes, lighting
and bell before every ride.
x Have the cycle checked for damage by your dealer after a fall or accident.