Operation Manual

CycleBasics
8
x Load the luggage carrier evenly.
x If you use panniers, ensure that the weight of the luggage is distributed equally
between the left and right-hand sides.
x Make sure that the luggage is adequately secured to prevent it falling off.
x Use bungee cords to secure luggage if necessary.
If your cycle is not equipped with a luggage carrier:
x Ask your dealer whether your cycle is suitable for a luggage carrier if you would like
to retrofit one.
x Have the luggage carrier fitted by your dealer.
1.8.1 Luggage carrier with clamp
1. Grasp the clamp, carefully pull it
upwards and hold it in this position.
2. Place your luggage on the luggage
carrier.
3. Fasten your luggage on the luggage
carrier by slowly lowering the clamp.
1.8.2 Luggage carrier with bungee cord and no clamp
1. Release the bungee cords.
2. Place your luggage on the luggage carrier.
3. Pull the bungee cords firmly over the
luggage.
4. Fasten the bungee cords to the
attachments provided on the frame of
the luggage carrier.
x Make sure that the luggage is
secured to prevent it falling off.
Illustr.: Luggage carrier with a clamp (example)
Illustr.: Luggage carrier with bungee cords
(example)