Operation Manual

Children’s bikeStabilisers
10
6 Stabilisers
Stabilisers (or training wheels) are auxiliary wheels that support a child while they are
learning to ride a bike. They prevent the children’s bike from tipping over.
x Assess whether your child needs stabilisers while learning to ride.
x If your child needs stabilisers while learning to ride, use the stabilisers supplied
(if applicable).
x If no stabilisers are supplied, contact your dealer about selecting and fitting suitable
stabilisers.
6.1 Fitting stabilisers
WARNING
Incorrectly or poorly fitted stabilisers can cause malfunctions
such as the rear wheel falling off.
Risk of accident and injury!
x If you lack the necessary expertise and the tools required to fit
the stabilisers, contact your dealer.
Depending on the model, suitable stabilisers may be supplied with the children’s bike.
The enclosed stabilisers should be used if stabilisers are required.
Care is required when fitting the stabilisers so that they serve their purpose correctly and
safely.
x If stabilisers are not supplied, ensure that they are purchased to fit the children’s
bike. The bolts on the rear wheel of the children’s bike must be long enough that
the stabilisers can be securely fastened on both sides.
x Consult your dealer about suitable stabilisers if necessary.
x Refer to information from the manufacturer about fitting stabilisers.
1. Completely unscrew the cap nuts from both sides of the axle by turning them
anticlockwise.
2. Remove the attached hub axle washer from the axle.
Stabilisers often consist of several parts.