User Manual

ManualsBrandsStahlwille ManualsHand ToolsTorque Spanner, Releasing 40 Nm Square 9.52 mm 222 mm

1

2

3

4

5

6

7

8

9

35

2. Slide the insert over the square drive

of the ratchet until it locates.

721/30

1. Check that the square drive is fitted to

the right side of the torque wrench.

2. If not, push the square drive out

through the upper side to the right

side.

3. For controlled tightening, switch the

ratchet to „R“ or, for uncontrolled

loosening of joints, to „L“.

4. Slide the insert over the square drive

until it locates.