User Manual

45
Every Manoskop
®
has two adjusting
screws inside for readjustment purposes.
These are accessible with an Allen key,
size 2 mm, through two holes in the hou-
sing.
The screw which is closest to the end of
the handle is primarily for adjusting the
lower end of the scale range.
The screw which is closest to the head is
primarily for adjusting the upper end of the
scale range.
Each screw has a minor effect on the
adjusting range of the other screw.
To protect the mechanisms from dirt,
these two holes are plugged. The
Manoskop
®
730/2 and 730/4 have the
holes under the removable plastic cover
for protection.
To adjust the wrench, you will need the
torque tester and an Allen key, size 2 mm.