User Manual

43
3. Set the torque wrench to 20% of the
maximum scale reading.
4. Operate the torque wrench five times
on the torque tester. Check o see that
the readings shown on the torque
tester are not more than 4.15%
greater and not more than 3.85%
smaller than the value set on the
torque wrench.
5. Set the torque wrench to 60% of the
maximum scale reading.
6. Operate the torque wrench five times
on the torque tester. Check to see
that the readings shown on the torque
tester are not more than 4.15%
greater and not more than 3.85%
smaller than the value set on the
torque wrench.
ã CAUTION !
Important note on the
accuracy of the
readings: Once the
wrench has cut out,
never apply more
pressure! You should
therefore not pull too
fast in case you cannot
stop the motion quickly
enough when you hear
the click.