User Manual

41
Only apply force to the Manoskop
®
via its
handle. Hold the handle in the middle.
Apply force at a tangent to the swivel
radius and at right angles to the axis of the
nut or bolt.
Pull steadily and without any interruption,
particularly during the final phase, until
you feel a jerk and hear a click. The torque
level set on the scale has now been
reached.
As soon as the torque wrench has cut out,
it is ready for the next job
ã CAUTION !
Important! Once the
wrench has cut out,
never apply more
pressure! You should
therefore not pull too
fast in case you cannot
stop the motion quickly
enough when you hear
the click.