User Manual

39
4. Release the button / pressure plate.
The torque level is now set.
5. Check the value again. If the setting is
wrong, return to 1.
Controlled counter
clockwise tightening
For reasons of accuracy, these torque
wrenches have been designed to work in
only one direction. The direction is
marked with an arrow.
Controlled counter clockwise tightening is
possible by turning the Manoskop
®
over.
Exceptions: The Manoskop
®
721/5 and
721/15 cannot be used for counter
clockwise tightening.
For controlled counter clockwise
tightening using the Manoskop
®
721/30 in
the turned over position, the square drive
must first be pushed through to the upper
side.