User Manual

37
730/5 to 730/65
1. If the tool was attached in the
„normal“ position, press the release
button on the underside of the head of
the wrench. If the tool was attached to
the torque wrench rotated through
180°. Insert a fine punch into the
locating hole in the head of the
wrench. Use the punch to depress the
locking pin.
2. Extract the insert tool.
Setting the torque level
The torque level at which the wrench cuts
out is set by moving the scale against the
fixed mark. Always approach the desired
torque setting from a lower value.
Intermediate settings between two marks
on the scale can be estimated.
In order to be able to set the scale, the
setting fail-safe mechanism has to be
operated first. Once the setting fail-safe
mechanism is released, the value set is
automatically locked.