User manual

Function and device design
6
206676 / 614860300010
2015-02-10·BA00·III·en·04
Portable Lamp
Series 6148
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3.2 Safe use
• Read and observe the safety notes in these operating instructions!
• Observe characteristic values and rated operating conditions on the rating and data
plates!
• Observe additional information plates on the device!
• Use the device in accordance with its intended and approved purpose only!
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged!
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
3.3 Intended Use
The portable lamp 6148 is equipment
• for mobile applications
• usable in a motor vehicle
• for use in Zones 1, 21, 2, 22 and in the safe area
• can be used indoors and outdoors
3.4 Modifications and alterations
4 Function and device design
4.1 Function
• To switch on, switch off, dim and make main light with LED flash
• To switch on and switch off secondary light with LED
• Emergency lighting function in connection with charging unit
• The emergency lighting function can be deactivated and activated
• To charge the battery via the charging unit
• Battery capacity test
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device. No liability or warranty for damage
resulting from modifications and alterations.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these operating instructions.