User manual BLS-315 Pro Lighting Stand B speaker / light stand
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 28.01.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This manual contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the product. If you sell the unit, please make sure that the buyer also receives this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety notes 2 Safety notes Intended use This speaker / light stand is used for stable fixing and height-adjustable installation of loud‐ speaker cabinets and lights. Use the product only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety notes Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
Safety notes CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage. Never exceed the maximum load capacity specified for the stand.
Safety notes NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet.
Features 3 Features Professional speaker and light stand n n n n n n n n 12 BLS-315 Pro Lighting Stand B speaker / light stand Material: Steel / magnesium compound Individually reinforced legs for high stability Height: 150 to 310 cm Stand space diameter 120 cm Pipe diameter: 28 mm 35 mm adapter for suitable speaker box Centric load capacity up to 30 kg Made in Europe
Operating 4 Operating Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Operating CAUTION! Danger of tipping on unsuitable surfaces When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install the stand only on even and solid surfaces. CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage. Never exceed the maximum load capacity specified for the stand.
Operating NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet. Comply with regulations When installing and operating, make sure to follow the standards and regulations that apply in your country.
Operating Setting up 16 BLS-315 Pro Lighting Stand B speaker / light stand 1. Unfold the feet of the stand until the cross braces are in a horizontal position. 2. Fix this position with the safety screw on the slider to which the three feet are attached. 3. Pull out the two safety pin and loosen the two safety screws on the extension tubes. 4. Pull out the upper extension tube to the desired height and slide the safety pin through the corresponding grid hole. 5.
Operating Dismounting 1. Remove spotlight or speaker box. 2. Pull out the safety pin on the lower extension tube. 3. Loosen the safety screw on the lower tube clamp and slide the lower extension tube all the way down. 4. Tighten the safety screw on the lower tube clamp. 5. Pull out the safety pin on the upper extension tube. 6. Loosen the safety screw on the upper tube clamp and slide the lower extension tube all the way down. 7. Tighten the safety screw on the upper tube clamp. 8.
Technical specifications 5 Technical specifications Height, max. 3.10 m Adjustable stand height 1.50 m … 3.10 m Floor space Æ 1.20 m Stand tube diameter Æ 28 mm Mounting options Flange, Æ 35 mm Adapter Æ 35 mm/36 mm Max. load capacity (for centric load) 30 kg Transport dimensions (W × H × D) 137 mm × 1290 mm × 131 mm Weight 6.
Technical specifications Further information Stand type Lighting stand Incl.
Protecting the environment 6 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes BLS-315 Pro Lighting Stand B speaker / light stand 21
Notes 22 BLS-315 Pro Lighting Stand B speaker / light stand
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
