User manual

1. Remove spotlight or speaker box.
2. Pull out the safety pin on the lower extension tube.
3. Loosen the safety screw on the lower tube clamp and slide the lower extension tube all
the way down.
4. Tighten the safety screw on the lower tube clamp.
5. Pull out the safety pin on the upper extension tube.
6. Loosen the safety screw on the upper tube clamp and slide the lower extension tube all
the way down.
7. Tighten the safety screw on the upper tube clamp.
8. If necessary, take o the adapter.
9. Loosen the safety screw on the slider to which the three feet are attached.
10. Fold up the feet of the tripod.
11. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
BLS-315 Pro Lighting Stand B Kit
19
speaker / light stand