User manual
2. Using stageClix for the rst time
1. Attach the antenna to the back of the receiver by turning
the nut clockwise.
(Do not use tools, and do not over-tighten)
2. Plug the supplied mains adapter into a 110-230V power
supply, and the DC plug into the rear-panel DC socket. Only
use the stageClix power supply.
3. Use the supplied patch cable to connect the rear-panel
output jack to your amplier input or to the input of your
effects unit.
4. Plug the transmitter into the front socket marked ‘charge’
and leave the transmitter to charge for some time,
preferably more than one hour.
2