Use and Care Guide

PAGE 5 of 28 40721-1703
OWNER'S MANUAL
®
PERSONAL FIREPROOF SAFES
STEP 2
With the door open, enter your own personal
security code, which can be 3-8 digits long,
and conrm your new code by pressing the
green key on the electronic touch pad.
STEP 1
To enter your own security code you will need to follow the steps listed below:
Aer installing the baeries, locate the reset buon on the edge of the hinge side of the door.
Press the red reset buon and then release it, you will hear a beep.
DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED YOUR NEW SECURITY CODE HAS BEEN
ENTERED CORRECTLY.








the safe.
You will have 3 seconds to press the green
key otherwise you will have to start over from
step one. There will be 2 beeps (if the sound is
turned on) and the green light will ash twice if
your code has been entered successfully.
Before you close the door, enter your new
security code and press the green key to
make sure the lock releases the knob so you can
turn it and retract the live acon locking bolts.
ENTERING YOUR SECURITY CODE
STEP 2 CONTINUE TO PAGE 6