Installation Guide

Fig. 2
Corners should be wrapped with a
waterproof membrane or aluminum
flashing.
Corners should be installed with
each course.
Inside corners use the same corner
pieces reversed.
Waterproof membrane or
flashing must be placed
around windows starting at
the bottom. Bottom
membrane must overlap
the top of the flashing on
the last course of siding.
Once the bottom flashing is
installed, you must do side
flashing overlapping
bottom flashing, then top
flashing is installed.
Window
For sill under a window,
remove the flashing and
glue with a heavy duty
construction adhesive. If
needed, cut the bottom of
the siding under the sill
leaving the flashing.
To cover a column, use
corner pieces as shown. The
corners will fit around a 15”
OD column without cutting.
You must wrap the column
with a waterproof
membrane or flashing before
the siding can be installed.
Our product is designed to
allow natural movement
that protects from freezing,
thawing, and settling. If you
use adhesive on the siding,
only place in the noted area
to allow for drainage.
Fig. 3