User manual

Lower button line
Call (usage of the call-in and hands-free calling
functions)
Using the menu option Call, the call-in function can be activated
to listen into the room in which the base station is installed or
to speak to a person in this room via the hands-free calling
function.
Activating the call-in function
Tap on Call: Your mobile device makes a phone call to the
base station now. When the connection is built up, a signal tone sounds: Use the number pad
of your mobile device to enter your personal Password (factory setting: 1111) first and # afterwards.
After the next signal tone, enter the number 4. The connection is automatically interrupted after
20 sec.
Note: By tapping on 4, the call-in time is respectively extended by another 20 sec. If you wish
to interrupted the connection prematurely, tap on the * key.
Activating the hands-free calling function
Tap on Call: Your mobile device makes a phone call to the base station now.
When the connection is built up, a signal tone sounds. Use the number pad of your mobile device
to enter your personal Password (factory setting: 1111) first and # afterwards.
After the next signal tone, enter the number 8. The connection is automatically interrupted after
20 sec.
Note: By tapping on 8, the hands-free calling time is respectively extended by another 20 sec.
If you wish to interrupted the connection prematurely, tap on the * key.
Relay Output
(switching relay
outputs)
This menu option is used to
activate/deactivate wireless
relay outputs.
Inquiry (inquiring the
alarm system status)
This menu option is used to
inquiry the current status of
your alarm system.
Tap on Inquiry and send
the inquiry SMS to the base
station.
You will immediately receive a SMS replay message containing the corresponding status message:
Arm OK (alarm system activated) or Disarm OK (alarm system deactivated).
37