User manual

6. Change User Password
The password adjusted ex works (1111) can be change here.
For A tap on Please enter password and enter 1111.
For B tap on Please enter password and enter the new
password (e.g. 2222).
For C tap on Please enter password and enter the new
password once again (e.g. 2222).
Tap on Done and send your setting to the base station.
7. Delay time
This menu is used to set the
Arm Delay time (arming
delay) and the Alarm Delay
time (triggering delay).
The arming delay adjusted
ex works amounts to 10 sec.
and allows leaving a room
secured by means of motion detectors without triggering an
alarm  i.e. the alarm system is only activated when the adjusted
delay time has elapsed. However, the alarming delay also
allows entering into the room for deactivating the alarm system
without triggering an alarm.
Use the menu options Arm Delay and Please enter time
(Max:59S) for entering the requested delay time (max. 59 sec.).
Use the menu options Arm Delay and Please enter time
(Max:59S) for entering the requested value (max. 59 sec.) here
as well.
Tap on Done and send your
settings to the base station.
8. CID center upload setting
This function is not activated for this model.
9. Factory Setting
This menu is used to reset the alarm system to its factory setting.
Attention: With this menu option, all sensors and remote
controls are also removed from the zones!
Tap on YES, if you wish to reset the alarm system to factory
setting.
Tap on Done and send your setting to the base station.
36