User manual

Tap on setting to open the menu. 9 submenus are available:

1. Phone & SMS numbers

entry of phone numbers for notifications

2. SMS Alert definition of SMS status messages

3. Siren ON/OFF

switching the internal/an optional external siren

4. Change Zone Attribute

Sensor designation for SMS notifications

5. Temp Control Setting

entry of min./max. values for temperature alarm

6. Change User Password password modification

7. Change Delay time modification of the delay time

8. CID center upload setting

menu/function is not activated for this model

9. Factory Setting RESET: For resetting to default settings

1. Phone & SMS numbers (notifications)

Up to 5 phone numbers can be defined which are automatically

contacted by the base station in the event of an alarm. Fur-

thermore, the type of notification (SMS or phone call) to the

respective number is defined here.

Note: In case of a phone call, the alarm signal of the internal

siren is transmitted via phone. In case of a SMS, a standard

text is transmitted which indicates the zone and the sensor

having triggered the alarm.

Tap on Please enter phone number and enter the phone

number. Select the type of notification by tapping either on the

phone symbol (= phone call) or on the speech balloon (= SMS).

Now tap on Done and send your settings to the base station.