User manual

29
Roger beep
When releasing the PTT key after transmission, a signal tone is auto-
matically transmitted. This tone signals to your contact partner that
your message is finished and your partner can talk (this is useful for
instance for disturbed radio communications).
Activating/deactivating the roger beep
Press the MENU key 9 x: OFF and the roger beep symbol are
flashing.
Use the CH
s/t key to select ON.
Confirm by pressing the
key: A double beep tone sounds and the
roger beep symbol is displayed.
For deactivating press the MENU key again 9 x: ON flashes.
Use the CH
s/t key to select OFF.
Confirm by pressing the
key: A double beep tone sounds, the
symbol is no longer displayed.
Activating/deactivating the key tone
Press the MENU key 10 x: OFF and the symbol are flashing.
Use the CH s/t keys to select ON.
Confirm by pressing the
key: A double beep tone sounds, the
symbol is displayed.
For deactivating press the MENU key again 10 x: ON flashes.
Use the CH
s/t key to select OFF.
Confirm by pressing the
key: A double beep tone sounds, the
symbol is no longer displayed.
Stopwatch function
The radio set is equipped with an integrated stop watch (measurement
range: 1 sec. - 60 min.). You may stop the time measurement and let
it continue again or you may reset to zero and start anew.
Activating/deactivating the stop watch
Press the MENU key 11 x: the minutes, the seconds and the stop
watch symbol are flashing.