User manual

Incoming call signaling

Three different incoming call signaling types are available.

Call tone

Call tone plus vibration

Vibration

Selecting the incoming call signaling

Press the MENU key 9 x: 1 and

start flashing.

Use the UP/DOWN keys to select the requested incoming call signaling.

Press the PTT key: The symbol of the selected incoming call signaling

is displayed.

Roger beep

When releasing the PTT key after transmission, a signal tone is auto-

matically transmitted. This tone signals to your contact partner that

your message is finished and your partner can talk (this is useful for

instance for disturbed radio communications).

Activating/deactivating the roger beep

Press the MENU key 10 x: rO OFF flashes.

Use the UP/DOWN keys to select rO ON.

Confirm by pressing the PTT key.

For deactivating press the MENU key again 10 x: rO ON flashes.

Use the UP/DOWN keys to select rO OFF.

Confirm by pressing the PTT key.

Activating/deactivating the key beep

Press the MENU key 11 x: tO OFF flashes.

Use the UP/DOWN keys to select tO ON.

Confirm by pressing the PTT key.

For deactivating press the MENU key again 11 x: tO ON flashes.

Use the UP/DOWN keys to select tO OFF.

Confirm by pressing the PTT key.

Dual watch function

If you wish to be ready-to-receive on both channels instead of only

one channel, you require the dual watch function. With this function