User manual

For deactivating press again the MENU four times: The adjusted
sensitivity level flashes.
Use the UP/DOWN keys to select OFF.
Confirm by pressing the PTT key, VOX is no longer displayed.
Automatic scan
The automatic scan permits to find active channels quickly. It scans
independently all of the 8 channels and stops as soon as a signal
exceeds the squelch threshold. It will start anew, if no signal is available.
You can also restart scanning by pressing the UP/DOWN keys.
Apart from the channel scan the radio set has two more scan functions:
Scanning for CTCSS pilot tones and scanning for digital codes.
Activating/deactivating the channel scan
Press the MENU key 5 x: SCAN flashes.
Use the UP/DOWN keys for starting the scan.
To deactivate scanning, press the PTT key, SCAN is no longer displayed.
Activating/deactivating the CTCSS scan
Press the MENU key 6 x: SCAN and CTCSS 00 start flashing.
Use the UP/DOWN keys for starting the scan.
To deactivate scanning, press the PTT key: SCAN and CTCSS are
no longer displayed.
Activating/deactivating the digital code scan
Press the MENU key 7 x: SCAN and DCS 00 start flashing.
Use the UP/DOWN keys for starting the scan.
To deactivate scanning, press the PTT key: SCAN and DCS are no
longer displayed.
Call tone
Push the call key to emit a tone call that is received by the partner
station. The TX symbol is displayed.
You can select among 15 different call tone melodies.
Selecting the call tone melody
Press the MENU key 8 x: C01 is displayed.
Use the UP/DOWN keys to select a call tone melody.
Confirm by pressing the PTT key.
30