User manual

Charging the battery cells in the charger

Ensure that both radio sets are switched off!

Plug the power supply unit into a socket

(230 V) and connect it to the charger.

Place the radio sets into the two char-

ging shafts.

Both control lamps on the charger emit

red light, the battery cells are now being

charged.

For this charger, the charging current

is set to approx. 75 mA or 150 mA.

The maximum charging time amounts

to 12 hours, afterwards charging is stopped. If the radio sets are not

removed from the charger, charge conversation automatically starts

after one hour. Both control lamps on the charger start flashing alternately.

Maximum charging times

The charging time depends on the state of charge and the capacity

of the battery cells.

With completely discharged battery cells with a capacity of 600 mAh

the battery cells are fully charged after 12 hours.

If you want to recharge two half-full battery cells, the charging time is

only 6 hours. Be sure to terminate the charging in time in order to avoid

overcharging of the battery cells!

Please note the following: Recharging of partly discharged battery

cells is basically possible, however, it reduces their lifetime!

Charging via the lateral charging socket

The battery cells of a radio set can also be charged

directly using the lateral charging socket:

Switch the radio set off!

Plug the power supply unit of the charger into

a socket (230 V) and connect it to lateral

charging socket of the radio set.

fre

eco