Product Manual

en
The REF button can be used to select any set
angle as 0° reference. The angle details now
displayed relate to this reference angle.
The next time the arm is rotated, only the newly
set angle is displayed. The display flashes in this
setting. The REF symbol indicates this function
setting.
The original reference angle value is displayed
for 2 seconds by briefly pressing the REF button.
The reference angle is deleted by:
• pressing and holding (≥ 3 sec) the REF button
• switching off
• the automatic switch-off function
Positive and negative angles when adjusting
the arm:
angle greater than reference: positive
angle less than reference: negative
Only the negative sign is displayed
1x
2 sec
3 sec
1x
1x
Reference function