TECH 700 DA en Operating Instructions www.stabila.
en On/Off Intended use The STABILA TECH 700 DA is an electronic angle finder with digital display for quickly and easily measuring angles. Together with the vials, the angle finder can also be used as a spirit level. Reference function HOLD function Angle halving If you still have questions after reading through the operating instructions, you can obtain advice by telephone: +49 63 46 3 09 0 1.800.869.7460 U.S.
en Insert batteries / Battery replacement Unscrew battery compartment lid on front, insert new batteries according to symbol in battery compartment. Suitable rechargeable batteries can also be used. LCD: low battery charge - insert new battery 1. 2x 1.5V alkaline AA, LR6, Mignon MN 1500 2. 1x 1 2 Commissioning After switching on, the version number S x.xx of the measuring program is briefly displayed. The unit is switched off by briefly pressing the "ON/OFF" button.
en Angle finder The angle finder displays the angle currently set between the arm and body. Angle measurements can be taken between 0° and 270°. 0°... 270° 0,5 mm/m 0,029° Spirit level The angle finder with 2 measuring surfaces is also a fully functional spirit level for horizontal and vertical measurements to level construction elements.
en Reference function 1x The REF button can be used to select any set angle as 0° reference. The angle details now displayed relate to this reference angle. The next time the arm is rotated, only the newly set angle is displayed. The display flashes in this setting. The REF symbol indicates this function setting. 2 sec 3 sec 1x 1x The original reference angle value is displayed for 2 seconds by briefly pressing the REF button.
en Lighting 1x Repeatedly pressing the "Lighting" button switches the display lighting on, to half luminance or off. 1x 1x HOLD function 1x The current measurement can be saved by pressing the HOLD button. The measurement is displayed continuously. In this setting, the display flashes and the HOLD symbol is displayed. This function can be used in combination with the reference function. The saved measurement is deleted by again pressing the HOLD button or switching the unit off.
en Angle halving The current measurement is halved by pressing the "Angle halving" button. The measurement is displayed continuously. In this setting, the display flashes and the "Angle halving" symbol is displayed. 1x The value is deleted by again pressing the "Angle halving" button or switching the unit off. Calibration of zero position Display value ≠ 0.0° 1x 3 sec During use, instances may arise when the display does not show 0.0° when the arm is swivelled all the way in.
Maintenance and upkeep en Technical data The electronic angle finder is a precision instrument and should therefore be handled with care. Accuracy of electronics module: Angle measurement: ± 0.1° Display window: Dirty window glass impairs the optical function. Only clean with a soft cloth, a little water or, if required, a mild detergent! Accuracy of spirit level: in normal position: in reverse position: 0.5 mm / m = 0.029° 0.75 mm / m = 0.
STABILA Messgeräte Gustav Ullrich GmbH P.O. Box 13 40 / D-76851 Annweiler Landauer Str. 45 / D-76855 Annweiler + 49 63 46 309 - 0 + 49 63 46 309 - 480 info@stabila.de www.stabila.com USA Canada STABILA Inc. 332 Industrial Drive South Elgin , IL 60177 www.stabila.com www.stabila.
