Product Manual
Table Of Contents
- 1. Intended use
- 2. Safety information
- 3. Components of the unit
- 4. Display elements
- 5. Commissioning
- 5.1 Inserting batteries/battery replacement
- 5.2 Switching the unit on
- 6. Functions
- 6.1 Visual guidance
- 6.2 Acoustic guidance
- 6.3 Automatic display inversion
- 6.4 Setting the MODE unit of measurement
- 6.5 Locking the measurement with HOLD
- 6.6 Freely selectable zero position REF
- 6.7 Lighting
- 6.8 Button lock
- 6.9 Automatic switch-off time: Auto OFF
- 7. Checking the measuring tool
- 7.1 Accuracy check
- 7.2 Calibration
- 7.3 Adjusting the sensor
- 7.4 Error messages
- 8. Technische Daten
TECH 500 DP
2
en
Contents
Section Page
• 1 Intended use 3
• 2 Safety information 3
• 3. Components of the unit 4
• 4. Display elements 5
• 5. Commissioning 6
• 5.1 Inserting batteries/battery replacement 6
• 5.2 Switching the unit on 6
• 6. Functions 7
• 6.1 Visual guidance 7
• 6.2 Acoustic guidance 8
• 6.3 Automatic display inversion 8
• 6.4 Setting the MODE unit of measurement 9
• 6.5 Locking the measurement with HOLD 9
• 6.6 Freely selectable zero position REF 10
• 6.7 Lighting 11
• 6.8 Key lock 11
• 6.9 Automatic switch-o time: Auto OFF 11
• 7. Checking the measuring tool
12
• 7.1 Accuracy check 12
• 7.2 Calibration 13
• 7.3 Adjusting the sensor 14
• 7.4 Error messages 17
• 8. Technical data 18