Product Manual
Table Of Contents
- 1. Intended use
- 2. Safety information
- 3. Components of the unit
- 4. Display elements
- 5. Commissioning
- 5.1 Inserting batteries/battery replacement
- 5.2 Switching the unit on
- 6. Functions
- 6.1 Visual guidance
- 6.2 Acoustic guidance
- 6.3 Automatic display inversion
- 6.4 Setting the MODE unit of measurement
- 6.5 Locking the measurement with HOLD
- 6.6 Freely selectable zero position REF
- 6.7 Lighting
- 6.8 Button lock
- 6.9 Automatic switch-off time: Auto OFF
- 7. Checking the measuring tool
- 7.1 Accuracy check
- 7.2 Calibration
- 7.3 Adjusting the sensor
- 7.4 Error messages
- 8. Technische Daten
TECH 500 DP
16
en
7.3 Adjusting the sensor
Step 3:
Turn the unit by 90°to plane 2.
Press the "CAL" button.
If the plane has been adjusted successfully,
it is permanently indicated in the display.
Step 4:
Turn the unit by 90°to plane 3.
Press the "CAL" button.
If the plane has been adjusted successfully,
it is permanently indicated in the display.
3
2
3
4