Product Manual
Table Of Contents
- 1. Intended use
- 2. Components of the unit
- 3. Display elements
- 4. Commissioning
- 4.1 Power supply - Charging the Li-ion rechargeable battery
- 4.2 M12 socket pin assignment
- 4.3 Connection cable
- 4.4 Switching the unit on
- 5. Functions
- 5.1 Visual guidance
- 5.2 Acoustic guidance
- 5.3 Automatic display inversion
- 5.4 Setting the "MODE" unit of measurement
- 5.5 Locking the measurement with "HOLD"
- 5.6 Freely selectable zero position "REF"
- 6. "FUNC" button settings
- 7. Checking the measuring tool
- 7.1 Accuracy check
- 7.2 Calibration -– Adjustment
- 7.3 Calibration
- 7.4 Adjusting the sensor
- 7.5 Error messages
- 8. Data transfer
- 8.1 Querying the measurement
- 8.2 Changing the bus address
- 8.3 Error codes
- 8.4 Auto mode
- 8.5 Print mode
- 9. STABILA Analytics evaluation software (optional)
- 10. Technical data
TECH 1000 DP
8
en
Triangles representing the inclination indicate the position
of the digital protractor in relation to the horizontal or
vertical axis.
The 2 "centre display" bars indicate the precise position
at which the vertical or horizontal axis is reached.
Display showing direction of inclination
0.01° - 45.00°
270.01° - 315.00°
45.00 ° - 89.99°
135.00° - 179.99°
225.00° - 269.99°
315.00° - 359.99°
90.01° - 135.00°
180.01° - 225.00°
0.00°
90.00°
180.00°
270.00°
5. Functions
5.1 Visual guidance
0°
90°