REC-300-2007:REC-210-2007-2.qxd 28.02.2000 02:19 Seite 9 GB Operating instructions The STABILA REC 300 Digital is a simple-to-use receiver for the rapid capture of rotating lasers. The REC 300 Digital receiver can receive laser beams from rotation lasers, even when these are invisible to the naked eye. The distance to the “on line“ position is indicated digitally We have endeavoured to explain the unit's handling and functioning in as clear and comprehensible manner as possible.
REC-300-2007:REC-210-2007-2.qxd 28.02.2000 02:19 Seite 10 Getting started Press the ON/OFF button (1). An audio signal and a short flash from the display will confirm, that the instrument is switched on. The instrument will now calibrate itself. 1. 2. ON/OFF button Automatic calibration Press the ON/OFF button (1) quickly once (2sec) to switch the instrument off. If the instrument is not used, it will automatically switch itself off after 30 minutes.
REC-300-2007:REC-210-2007-2.qxd 28.02.2000 02:19 Seite 11 Height difference display: digital The distance to the “on line“ position is indicated by digital figures Measuring modes Setting the accuracy level The icons appear permanently 2x The display appears only briefly Accuracy button 1 sec Fine ± 1,0 mm ± 0,05 in ± 1/16 in ± 0,005 ft Coarse ± 5,0 mm ± 0,2 in ± 1/4 in ± 0,02 ft The setting selected remains in memory after the unit is switched off.
REC-300-2007:REC-210-2007-2.qxd 28.02.2000 02:19 Seite 12 Replacing the batteries LCD Full: Batteries OK Half: Initial Warning Empty: Approximately 30 Minutes Remaining Slide the battery cover (10) in the direction of the arrow and insert new batteries in accordance with the symbols in the battery compartment. 2 x 1,5V Mignon cells Alkaline, Size AA, LR6 Flashing: Change Batteries! Mignon AA LR6 Remove the batteries if the unit will not be used for a long period ! Battery compartment cover.
REC-300-2007:REC-210-2007-2.qxd 28.02.2000 02:19 Seite 13 Care and maintenance Cleaning: Please do not remove dust and dirt from the receiving or display window by using dry cloths or abrasive materials as this procedure scratches the windows. A soft cloth and mild soap and water are effective. The unit may be submerged under water or sprayed with a low pressure hose if necessary. Do not use any other fluids other than water or glass- cleaner, as they may attack polymer components.
REC-300-2007:REC-210-2007-2.qxd 28.02.2000 02:19 Seite 14 Recycling programme for our EU customers: In accordance with the WEEE regulations, STABILA provides a disposal programme for electronic products at the end of their service life. For more details, please contact: www.STABILA.
