Full Product Manual
Table Of Contents
- Contents
- Overview
- Ring Terminals
- Flag Terminals
- Fork Terminals
- Pin Terminals
- Splice Connectors
- Wire Joints
- Heat-Shrinkable Terminals, Splices, Disconnects
- Disconnects and Male Tabs
- Luminaire Disconnects
- Ferrules
- Wire Termination Tools and Installation Kits
- Wire Termination Technical Information
- Shrink-Kon® Heat-Shrinkable Tubing
- Shrink-Kon® Splice Insulatorsand Insulating Covers
- Shrink-Kon® Installation Tools
- Shield-Kon® Shield Termination System
- Dragon-Tooth® Magnet WireTermination System
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
G-69
Shrink-Kon
®
Heat-Shrinkable Tubing
Wire Termination — Sta-Kon
®
Wire Termination & Insulation
3:1 Shrink Ratio
3:1 Shrink Ratio
CPO-A Series — Thin-Wall,
Adhesive Lined
• Adhesive lined for moisture-proof environmental seal
• High 3:1 shrink ratio for covering irregularly shaped objects
• Continuous operating temperature: -55° C to 110° C
• Shrink temperature 120° C
CPO-A Series Thin-Wall Heat-Shrinkable Tubing
CAT. NO.
MIN.
EXPANDED
I.D. (IN.)
MAX
RECOVERED
I.D. (IN.)
NOMINAL
RECOVERED
WALLED (IN.)
CODE CABLE
SIZE
STANDARD
LENGTH (IN.)
STD. PKG.
QTY.
CPO-A-125-48 .13 .02 .04 #24–#30 AWG 48 25
CPO-A-187-48 .18 .06 .05 #14–#22 AWG 48 25
CPO-A-250-48 .25 .08 .05 #10–#22 AWG 48 25
CPO-A-375-48 .38 .14 .05 #6–#16 AWG 48 25
CPO-A-500-48 .50 .19 .07 #2–#12 AWG 48 25
CPO-A-750-48 .75 .31 .07 3/0–#4 AWG 48 25
Note: Non-standard colors, sizes and lengths available subject to factory quotation.
Standard color: Black
............................................................................ CPO-A Series Specifications ..............................................................................
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Physical
• Tensile Strength ASTM D2671, ISO 37 2200 psi (15.0 MPa)
• Elongation ASTM D2671, ISO 37 400%
• Heat Shock (4 hrs. at 250° C) ASTM D2671 No Cracking or Flowing
• Longitudinal Change ASTM D2671 ±5%
• Low-Temperature Flexibility ASTM D2671 No Cracking
(4 hrs. at -55° C)
• Specific Gravity ASTM D792, ISO R1183 1.1
• 2% Secant Modulus ASTM 2671 1600 psi (110 MPa)
• Heat-Resistant Properties MIL-DTL-23053/4 240%
(168 hrs. at 175° C)
• Flammability ASTM D2671 Moderately Flame Retardant
PROPERTY
TEST
METHOD
TYPICAL
PERFORMANCE
Electrical
• Dielectric Strength ASTM D2671, IEC 243 600V/Mil (24kV/mm)
• Volume Resistivity ASTM D2671 1016 ohm-cm
Chemical
• Fluid Resistance MIL-DTL-23053/4, Good to Excellent
ISO 1817, ISO 37
• Fungus Resistance ASTM G21 No Growth
• Copper Corrosion ASTM D2671 No Corrosion
• Water Absorption ASTM D570 .2%