Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsTriac, SOT-223, 600V, 1A

1/7

Z01 Series

STANDARD 1A TRIACS

October 2001 - Ed: 4

MAIN FEATURES:

DESCRIPTION

The Z01 series is suitable for general purpose AC

switching applications. They can be found in

applications such as home appliances

(electrovalve, pump, door lock, small lamp

control), fan speed controllers,...

Different gate current sensitivities are available,

allowing optimized performances when controlled

directly from microcontrollers.

Symbol Value Unit

T(RMS)

DRM

RRM

600 to 800 V

GT (Q

)

3 to 25 mA

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Unit

T(RMS)

RMS on-state current (full sine wave) SOT-223 Ttab = 90°C

TO-92 TI = 50°C

TSM

Non repetitive surge peak on-state

current (full cycle, Tj initial = 25°C)

F = 50 Hz t = 20 ms 8 A

F = 60 Hz t = 16.7 ms 8.5

t Value for fusing

tp = 10 ms 0.35

dI/dt

Critical rate of rise of on-state current

= 2 x I

, tr ≤ 100 ns

F = 120 Hz Tj = 125°C 20 A/µs

Peak gate current tp = 20 µs Tj = 125°C 1 A

G(AV)

Average gate power dissipation Tj = 125°C 0.1 W

stg

Storage junction temperature range

Operating junction temperature range

- 40 to + 150

- 40 to + 125

°C

TO-92

(Z01xxA)

SOT-223

(Z01xxN)

Summary of content (7 pages)

PAGE 1
Z01 Series ® 1A TRIACS STANDARD MAIN FEATURES: A2 Symbol Value Unit IT(RMS) 1 A VDRM/VRRM 600 to 800 V IGT (Q1) 3 to 25 mA G A1 A2 A1 DESCRIPTION The Z01 series is suitable for general purpose AC switching applications. They can be found in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Different gate current sensitivities are available, allowing optimized performances when controlled directly from microcontrollers.
PAGE 2
Z01 Series ELECTRICAL CHARACTERISTICS (Tj = 25°C, unless otherwise specified) Symbol Test Conditions IGT (1) Quadrant RL = 30 Ω VD = 12 V VD = VDRM IH (2) IT = 50 mA IL IG = 1.2 IGT (dV/dt)c (2) 07 09 10 3 5 5 7 10 10 25 25 MAX. ALL MAX. 1.3 V ALL MIN. 0.2 V RL = 3.3 kΩ Tj = 125°C MAX. I - III - IV MAX. II dV/dt (2) Unit 03 I - II - III IV VGT VGD Z01xx 7 10 10 mA 25 mA mA 7 10 15 25 15 20 25 50 VD = 67 %VDRM gate open Tj = 110°C MIN.
PAGE 3
Z01 Series PRODUCT SELECTOR Voltage Part Number 600 V 700 V Sensitivity Type Package 800 V Z0103MA X 3 mA Standard TO-92 Z0103MN X 3 mA Standard SOT-223 Z0103SA X 3 mA Standard TO-92 Z0103SN X 3 mA Standard SOT-223 Z0103NA X 3 mA Standard TO-92 Z0103NN X 3 mA Standard SOT-223 Z0107MA X 5 mA Standard TO-92 Z0107MN X 5 mA Standard SOT-223 Z0107SA X 5 mA Standard TO-92 Z0107SN X 5 mA Standard SOT-223 Z0107NA X 5 mA Standard TO-92 Z0107NN X 5 mA S
PAGE 4
Z01 Series OTHER INFORMATION Part Number Marking Weight Base quantity Packing mode Z01xxyA 1AA2 Z01xxyA 0.2 g 2500 Bulk Z01xxyA 2AL2 Z01xxyA 0.2 g 2000 Ammopack Z0103yN 5AA4 Z3y 0.12 g 1000 Tape & reel Z0107yN 5AA4 Z7y 0.12 g 1000 Tape & reel Z0109yN 5AA4 Z9y 0.12 g 1000 Tape & reel Z0110yN 5AA4 Z0y 0.12 g 1000 Tape & reel Note: xx = sensitivity, y = voltage Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle). Fig.
PAGE 5
Z01 Series Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). Fig. 5: Surge peak on-state current versus number of cycles. IGT,IH,IL [Tj] / IGT,IH,IL [Tj=25°C] ITSM(A) 2.5 2.0 IGT 1.5 IH & IL 1.0 0.5 Tj(°C) 0.0 -40 -20 0 20 40 60 80 100 120 140 Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of I²t.
PAGE 6
Z01 Series Fig. 10: SOT-223 Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35µm). Rth(j-a) (°C/W) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.0 SOT-223 S(cm²) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 PACKAGE MECHANICAL DATA SOT-223 (Plastic) DIMENSIONS c A REF. V A1 Min. B e1 D B1 H E e 6/7 Millimeters A A1 B B1 c D e e1 E H V 0.02 0.60 2.90 0.24 6.30 3.30 6.70 Typ. 0.70 3.00 0.26 6.50 2.3 4.6 3.50 7.00 Max.
PAGE 7
Z01 Series FOOTPRINT DIMENSIONS (in millimeters) SOT-223 (Plastic) PACKAGE MECHANICAL DATA TO-92 (Plastic) DIMENSIONS REF. A Min. a B C F D E Millimeters A B C D E F a Typ. Max. Inches Min. 1.35 Typ. Max. 0.053 4.70 0.185 2.54 0.100 4.40 12.70 0.173 0.500 3.70 0.45 0.146 0.017 Information furnished is believed to be accurate and reliable.