Datasheet
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol Parameter Value Unit
V
CC
Supply voltage
(1)
6
V
V
id
Differential input voltage
(2)
±V
CC
V
in
Input voltage
(3)
(V
CC-
) - 0.2 to (V
CC+
) + 0.2
I
in
Input current
(4)
10 mA
T
stg
Storage temperature -65 to 150
°C
T
j
Maximum junction temperature 150
R
thja
Thermal resistance junction to
ambient
(5)
(6)
DFN8 2x2 57
°C/W
DFN6 1.3x1.6x0.55 230
SOT23-5 250
SO8 125
MiniSO8 190
SO14 103
TSSOP14 100
R
thjc
Thermal resistance junction to case
SOT23-5 81
SO8 40
MiniSO8 39
SO14 31
TSSOP14 32
ESD
HBM: human body model
(7)
5 kV
MM: machine model
(8)
400
V
CDM: charged device model
(9)
SOT23-5, SO8, MiniSO8,
DFN8 2x2
1500
DFN6 1.3x1.6x0.55 TBD
TSSOP14 750
SO14 500
Latch-up immunity 200 mA
1. V
alue is with respect to the V
CC-
pin.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. V
CC
- V
IN
must not exceed 6 V.
4. Input current must be limited by a resistor in series with the inputs.
5. Short-circuits can cause excessive heating and destructive dissipation.
6. R
th
are typical values.
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
8. Machine model: 200 pF charged to the specified voltage, then discharged directly between two pins of the device with no
external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.
9. Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to
the ground.
TSV991, TSV992, TSV994 TSV991A, TSV992A, TSV994A
Absolute maximum ratings and operating conditions
DS4975 - Rev 14
page 2/28