Datasheet

Package information TS556
16/19 DocID4078 Rev 3
5.1 SO14 package information
Figure 8. SO14 package outline
Note: D and F dimensions do not include mold flash or protrusions. Mold flash or protrusions must
not exceed 0.15
mm.
Table 11. SO14 mechanical data
Dimensions
Ref.
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.35 1.75 0.05 0.068
A1 0.10 0.25 0.004 0.009
A2 1.10 1.65 0.04 0.06
B 0.33 0.51 0.01 0.02
C 0.19 0.25 0.007 0.009
D 8.55 8.75 0.33 0.34
E 3.80 4.0 0.15 0.15
e1.27 0.05
H 5.80 6.20 0.22 0.24
h 0.25 0.50 0.009 0.02
L 0.40 1.27 0.015 0.05
k 8° (max.)
ddd 0.10 0.004