Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsTriac, TO-251, 600V, 4A

1/10

Table 1: Main Features

DESCRIPTION

Based on ST’s Snubberless / Logic level technol-

ogy providing high commutation performances,

the T4 series is suitable for use on AC inductive

loads.

They are recommended for applications using

universal motors, electrovalves.... such as kitchen

aid equipments, power tools, dishwashers,...

Available in a fully insulated package, the T4...-

...W version complies with UL standards (ref.

E81734).

Symbol Value Unit

T(RMS)

DRM

RRM

600 to 800 V

GT (Q

)

5 to 35 mA

T4 Series

4A TRIACS

REV. 7January 2006

SNUBBERLESS™ & LOGIC LEVEL

Table 2: Order Codes

Part Number Marking

T405-xxxB

See page table 8 on

page 9

T405-xxxB-TR

T405-xxxH

T405-xxxT

T405-xxxW

T410-xxxB

T410-xxxB-TR

T410-xxxH

T4105-xxxT

T410-xxxW

T435-xxxB

T435-xxxB-TR

T435-xxxH

T435-xxxT

T435-xxxW

DPAK

(T4-B)

TO-220AB

(T4-T)

ISOWATT220AB

(T4-W)

IPAK

(T4-H)

Summary of content (10 pages)

PAGE 1
T4 Series ® 4A TRIACS SNUBBERLESS™ & LOGIC LEVEL Table 1: Main Features A2 Symbol Value Unit IT(RMS) 4 A VDRM/VRRM 600 to 800 V IGT (Q1) 5 to 35 mA G A1 A2 A2 A1 A2 G DESCRIPTION Based on ST’s Snubberless / Logic level technology providing high commutation performances, the T4 series is suitable for use on AC inductive loads. They are recommended for applications using universal motors, electrovalves.... such as kitchen aid equipments, power tools, dishwashers,...
PAGE 2
T4 Series Table 3: Absolute Maximum Ratings Symbol IT(RMS) ITSM Parameter IPAK/DPAK/ TO-220AB RMS on-state current (full sine wave) Non repetitive surge peak on-state F = 50 Hz current (full cycle, Tj initial = 25°C) F = 60 Hz tp = 10 ms dI/dt Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz IGM Peak gate current tp = 20 µs PG(AV) Tstg Tj Unit 4 A ISOWATT220AB Tc = 105°C I²t Value for fusing I²t Tc = 110°C Value Average gate power dissipation t = 20 ms 30
PAGE 3
T4 Series Table 5: Static Characteristics Symbol Test Conditions VT (2) ITM = 5.5 A Vto (2) tp = 380 µs Value Unit Tj = 25°C MAX. 1.56 V Threshold voltage Tj = 125°C MAX. 0.89 V Rd (2) Dynamic resistance Tj = 125°C MAX. 120 mΩ IDRM IRRM VDRM = VRRM 5 µA 1 mA Tj = 25°C Tj = 125°C MAX. Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1. Table 6: Thermal resistance Symbol Rth(j-c) Parameter Junction to case (AC) S = 0.
PAGE 4
T4 Series Figure 1: Maximum power dissipation versus RMS on-state current (full cycle) Figure 2: RMS on-state current versus case temperature (full cycle) P(W) IT(RMS)(A) 4.5 6 4.0 5 TO-220AB / DPAK / IPAK 3.5 3.0 4 ISOWATT220AB 2.5 3 2.0 1.5 2 1.0 1 0.5 IT(RMS)(A) TC(°C) 0.0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 4.
PAGE 5
T4 Series Figure 7: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t 2 Figure 8: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25°C] 2 ITSM(A), I t (A s) 2.5 500 Tj initial=25°C 2.0 dI/dt limitation: 50A/µs 100 IGT ITSM 1.5 IH & IL 1.0 10 I2t 0.5 Tj(°C) tp(ms) 0.0 1 0.01 0.10 1.00 -40 10.
PAGE 6
T4 Series Figure 12: Ordering Information Scheme T 4 05 - 600 B (-TR) Triac series Current 4 = 4A Sensitivity 05 = 5mA 10 = 10mA 35 = 35mA Voltage 600 = 600V 700 = 700V 800 = 800V Package B = DPAK H = IPAK T = TO-220AB W = ISOWATT220AB Packing mode Blank = Tube -TR = Tape & reel Table 7: Product Selector Part Number T405-xxxB T405-xxxH T405-xxxT T405-xxxW T410-xxxB T410-xxxH T410-xxxT T410-xxxW T435-xxxB T435-xxxH T435-xxxT T435-xxxW 6/10 600 V X X X X X X X X X X X X Voltage (xxx) 700 V 800 V X X X X
PAGE 7
T4 Series Figure 13: DPAK Package Mechanical Data DIMENSIONS REF. E A B2 C2 L2 D R H L4 A1 B R G C A2 0.60 MIN. Inches Min. Max Min. Max. A 2.20 2.40 0.086 0.094 A1 0.90 1.10 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.90 0.025 0.035 B2 5.20 5.40 0.204 0.212 C 0.45 0.60 0.017 0.023 C2 0.48 0.60 0.018 0.023 D 6.00 6.20 0.236 0.244 E 6.40 6.60 0.251 0.259 G 4.40 4.60 0.173 0.181 H 9.35 10.10 0.368 0.397 L2 V2 Millimeters 0.80 typ. 0.
PAGE 8
T4 Series Figure 15: ISOWATT220AB Package Mechanical Data DIMENSIONS REF. Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 B 2.50 2.70 0.098 0.106 D 2.50 2.75 0.098 0.108 E 0.40 0.70 0.016 0.028 F 0.75 1.00 0.030 0.039 F1 1.15 1.70 0.045 0.067 F2 1.15 1.70 0.045 0.067 G 4.95 5.20 0.195 0.205 G1 2.40 2.70 0.094 0.106 H 10.00 10.40 0.394 0.409 L2 16.00 typ. 0.630 typ. L3 28.60 30.60 1.125 1.205 L4 9.80 10.60 0.386 0.
PAGE 9
T4 Series Figure 17: TO-220AB Package Mechanical Data REF. C B ØI b2 L F A I4 l3 c2 a1 l2 a2 M c1 b1 e A a1 a2 B b1 b2 C c1 c2 e F ØI I4 L l2 l3 M DIMENSIONS Millimeters Inches Min. Typ. Max. Min. Typ. 15.20 15.90 0.598 3.75 0.147 13.00 14.00 0.511 10.00 10.40 0.393 0.61 0.88 0.024 1.23 1.32 0.048 4.40 4.60 0.173 0.49 0.70 0.019 2.40 2.72 0.094 2.40 2.70 0.094 6.20 6.60 0.244 3.75 3.85 0.147 15.80 16.40 16.80 0.622 0.646 2.65 2.95 0.104 1.14 1.70 0.044 1.14 1.70 0.044 2.60 0.102 Max. 0.625 0.
PAGE 10
T4 Series Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice.