Datasheet

ManualsBrandsST ManualsDiodesRectifier Diode 50A 200V ISOTOP

April 2006 Rev 1 1/8

STTH10002

Ultrafast recovery diode

Main product characteristics

Features and benefits

■ Very low forward losses

■ Low recovery time

■ High surge current capability

■ Insulated

– Insulating voltage = 2500 V

rms

– Capacitance = 45 pF

Description

The STTH10002 is a dual rectifier suited for

welding equipment, and high power industrial

applications.

Packaged in ISOTOP, this device is intended for

use in the secondary rectification of power

converters.

Order codes

F(AV)

2 x 50 A

RRM

200 V

(max) 150° C

(typ) 0.72 V

(typ) 30 ns

Part Number Marking

STTH10002TV1 STTH10002TV1

STTH10002TV2 STTH10002TV2

A1 A1

ISOTOP

STTH10002TV1

ISOTOP

STTH10002TV2

www.st.com

Summary of content (8 pages)

PAGE 1
STTH10002 Ultrafast recovery diode Main product characteristics IF(AV) 2 x 50 A VRRM 200 V Tj (max) 150° C VF (typ) 0.
PAGE 2
Characteristics STTH10002 1 Characteristics Table 1. Absolute ratings (limiting values at Tj = 25° C, unless otherwise specified) Symbol Parameter VRRM Repetitive peak reverse voltage IF(RMS) RMS forward current IF(AV) Average forward current, δ = 0.5 IFSM Surge non repetitive forward current Tstg Storage temperature range Tj Table 2.
PAGE 3
STTH10002 Characteristics Table 4. Dynamic characteristics Symbol Parameter trr Test conditions Typ Max. Unit IF = 1 A, dIF/dt = -50 A/µs, VR = 30 V, Tj = 25 °C 53 65 ns IF = 1 A, dIF/dt = -200 A/µs, VR = 30 V, Tj = 25 °C 30 37 Reverse recovery current IF = 50 A, dIF/dt = 200 A/µs, VR = 160 V, Tj = 125 °C 10 13 Forward recovery time IF = 50 A, dIF/dt = 200 A/µs VFR = 1.1 x VFmax, Tj = 25 °C 180 ns Forward recovery voltage IF = 50 A, dIF/dt = 200 A/µs, Tj = 25 °C 1.
PAGE 4
Characteristics Figure 5. STTH10002 Junction capacitance versus reverse applied voltage (typical values) Figure 6. C(pF) 450 1000 F=1MHz Vosc=30mVRMS Tj=25°C Reverse recovery charges versus dIF/dt (typical values) QRR(nC) IF = 50 A VR=160 V 400 350 300 Tj=125 °C 250 200 150 100 Tj=25 °C 50 VR(V) 100 dIF/dt(A/µs) 0 1 10 Figure 7. 100 1000 10 100 Reverse recovery time versus dIF/dt Figure 8.
PAGE 5
STTH10002 2 Ordering information scheme Ordering information scheme STTH 100 02 TVx Ultrafast switching diode Average forward current 100 = 100 A Repetitive peak reverse voltage 02 = 200 V Package TVx = ISOTOP 5/8
PAGE 6
Package information 3 STTH10002 Package information Table 5. ISOTOP dimensions DIMENSIONS REF. Millimeters Inches E Min. Max. Min. Max. A 11.80 12.20 0.465 0.480 A1 8.90 9.10 0.350 0.358 B 7.8 8.20 0.307 0.323 E2 C 0.75 0.85 0.030 0.033 F C2 1.95 2.05 0.077 0.081 D 37.80 38.20 1.488 1.504 D1 31.50 31.70 1.240 1.248 E 25.15 25.50 0.990 1.004 E1 23.85 24.15 0.939 0.951 G2 A C A1 C2 F1 P1 D G S D1 E2 24.80 typ. 0.976 typ. G 14.90 15.
PAGE 7
STTH10002 4 5 Ordering information Ordering information Part Number Marking Package Weight Base qty Delivery mode STTH10002TV1 STTH10002TV1 ISOTOP 27 g 10 Tube STTH10002TV2 STTH10002TV2 ISOTOP 27 g 10 Tube Revision history Date Revision 05-Apr-2006 1 Description of Changes First issue 7/8
PAGE 8
STTH10002 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.