Datasheet

ManualsBrandsST ManualsDiodesSchottky Diode, 1A, 100V, DO-214AC, SMA

SMA

SMB

Features

• AEC-Q101 qualified

• Negligible switching losses

• High junction temperature capability

• Low leakage current

• Good trade off between leakage current and forward voltage drop

• Avalanche capability specified

• ECOPACK

2 compliant component

• PPAP capable

• V

RRM

guaranteed from -40°C to +175°C

Description

Schottky rectifiers packaged in SMA or SMB, and designed for high frequency

miniature switched mode power supplies as DC/DC converters for automotive

applications. It is particularly suited for LED lighting applications, ADAS power, and

ECU (Engine Control Unit) in automotive environment.

Product status

STPS1H100-Y

Product summary

Symbol Value

F(AV)

1 A

RRM

100 V

(range)

-40 °C to +175 °C

F(max.)

0.62 V

Automotive high voltage power Schottky rectifier

STPS1H100-Y

Datasheet

DS6946 - Rev 2 - April 2018

For further information contact your local STMicroelectronics sales office.

www.st.com

Summary of content (11 pages)

PAGE 1
STPS1H100-Y Datasheet Automotive high voltage power Schottky rectifier Features A A K K SMB SMA • • • • • • AEC-Q101 qualified Negligible switching losses High junction temperature capability Low leakage current Good trade off between leakage current and forward voltage drop Avalanche capability specified • • • ECOPACK®2 compliant component PPAP capable VRRM guaranteed from -40°C to +175°C Description Schottky rectifiers packaged in SMA or SMB, and designed for high frequency miniature switched m
PAGE 2
STPS1H100-Y Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage, Tj = -40 °C to +175 °C 100 V IF(RMS) Forward rms current 10 A 1 A SMA TL = 150 °C SMB TL = 155 °C IF(AV) Average forward current, δ = 0.
PAGE 3
STPS1H100-Y Characteristics (curves) 1.1 Characteristics (curves) Figure 1. Average forward power dissipation versus average forward current Figure 2. Average forward current versus ambient temperature (δ = 0.5) IF(AV)(A) 1.2 PF(AV) (W) 0.8 0.7 δ = 0.1 δ = 0.05 δ= 0.2 δ = 0.5 Rth(j-a)=Rth(j-l) 1.0 Rth(j-a)=120°C/W 0.6 SMB Rth(j-a)=100°C/W 0.8 δ= 1 SMA 0.5 Rth(j-a)=200°C/W 0.6 0.4 0.3 0.4 T 0.2 T 0.1 IF(AV) (A) 0.2 tp δ =tp/T δ=tp/T 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.
PAGE 4
STPS1H100-Y Characteristics (curves) Figure 7. Junction capacitance versus reverse voltage applied (typical values) Figure 8. Forward voltage drop versus forward current (maximum values) C(pF) IFM(A) 100 100.00 F=1 MHz VOSC=30 mVRMS Tj=25 °C 10.00 Tj=125 °C Tj=25 °C 1.00 0.10 VR(V) 10 1 10 100 VFM(V) 0.01 0.0 Figure 9. Thermal resistance junction to ambient versus copper surface under each lead (SMB) 200 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Figure 10.
PAGE 5
STPS1H100-Y Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 SMB package information • • Epoxy meets UL94, V0 Lead-free package Figure 11.
PAGE 6
STPS1H100-Y SMB package information Table 4. SMB package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.0748 0.0965 A2 0.05 0.20 0.0020 0.0079 b 1.95 2.20 0.0768 0.0867 c 0.15 0.40 0.0059 0.0157 D 3.30 3.95 0.1299 0.1556 E 5.10 5.60 0.2008 0.2205 E1 4.05 4.60 0.1594 0.1811 L 0.75 1.50 0.0295 0.0591 Figure 12. SMB recommended footprint 1.62 2.60 1.62 (0.064) (0.102) (0.064) 2.18 (0.086) 5.84 (0.
PAGE 7
STPS1H100-Y SMA package information 2.2 SMA package information • • Epoxy meets UL94, V0 Lead-free package Figure 13. SMA package outline E1 D E A1 C L A2 b Table 5. SMA package mechanical data Dimensions Millimeters Ref. DS6946 - Rev 2 Inches Min. Max. Min. Max. A1 1.90 2.45 0.075 0.097 A2 0.05 0.20 0.002 0.008 b 1.25 1.65 0.049 0.065 c 0.15 0.40 0.006 0.016 D 2.25 2.90 0.089 0.114 E 4.80 5.35 0.189 0.211 E1 3.95 4.60 0.156 0.181 L 0.75 1.50 0.
PAGE 8
STPS1H100-Y SMA package information Figure 14. SMA recommended footprint in mm (inches) 1.4 2.63 1.4 (0.055) (0.103) (0.055) 1.64 (0.064) 5.43 (0.
PAGE 9
STPS1H100-Y Ordering Information 3 Ordering Information Table 6. Ordering information DS6946 - Rev 2 Order code Marking Package Weight Base qty. STPS1H100AY S11Y SMA 0.068 g 5000 STPS1H100UY G11Y SMB 0.
PAGE 10
STPS1H100-Y Revision history Table 7. Document revision history DS6946 - Rev 2 Date Version Changes 3-Dec-2010 1 Initial release. 10-Apr-2018 2 Update Figure 3 "Normalized avalanche power derating versus pulse duration" with PARM 10 µs curve.
PAGE 11
STPS1H100-Y IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.