Datasheet

ManualsBrandsST ManualsDiodesSchottky Diode, 1A, 100V, DO-214AC, SMA

Features

• Negligible switching losses

• High junction temperature capability

• Low leakage current

• Good trade off between leakage current and forward voltage drop

• Avalanche capability specified

• ECOPACK2 halogen-free component

Description

Schottky rectifiers designed for high frequency miniature switched mode power

supplies such as adaptors and on board DC/DC converters.

Packaged in SMA, SMA Flat, SMA Flat Notch,or SMB, this diode is ideal for use in

lighting and telecom power applications.

Product status

STPS1H100

Product summary

Symbol Value

F(AV)

1 A

RRM

100 V

j(max.)

175 °C

F(max.)

0.62 V

100 V, 1 A power Schottky rectifier

STPS1H100

Datasheet

DS1228 - Rev 8 - October 2019

For further information contact your local STMicroelectronics sales office.

www.st.com

Summary of content (15 pages)

PAGE 1
STPS1H100 Datasheet 100 V, 1 A power Schottky rectifier Features • • • • • • Negligible switching losses High junction temperature capability Low leakage current Good trade off between leakage current and forward voltage drop Avalanche capability specified ECOPACK2 halogen-free component Description Schottky rectifiers designed for high frequency miniature switched mode power supplies such as adaptors and on board DC/DC converters.
PAGE 2
STPS1H100 Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 100 V IF(RMS) Forward rms current 10 A 1 A IF(AV) Average forward current, δ = 0.
PAGE 3
STPS1H100 Characteristics (curves) 1.1 Characteristics (curves) Figure 1. Average forward power dissipation versus average forward current Figure 2. Average forward current versus ambient temperature (δ = 0.5) IF(AV)(A) 1.2 PF(AV) (W) 0.8 0.7 δ = 0.1 δ = 0.05 δ= 0.2 δ = 0.5 Rth(j-a)=Rth(j-l) 1.0 Rth(j-a)=120°C/W 0.6 SMB / SMA Flat Rth(j-a)=100°C/W 0.8 δ= 1 SMA 0.5 Rth(j-a)=200°C/W 0.6 0.4 0.3 0.4 T 0.2 T 0.1 IF(AV) (A) 0.2 tp δ =tp/T δ=tp/T 0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.
PAGE 4
STPS1H100 Characteristics (curves) Figure 7. Relative variation of thermal impedance junction to ambient versus pulse duration Figure 8. Reverse leakage current versus reverse voltage applied (typical values) Zth(j-a)/Rth(j-a) 1.E+03 1.00 IR(µA) SMA Flat SMA Flat Notch 1.E+02 Tj=125 °C 1.E+01 0.10 1.E+00 1.E-01 Single pulse Tj=25 °C 1.E-02 t p (s) 0.01 1.E-03 1.E-02 1.E-01 1.E+00 VR(V) 1.E+01 1.E+02 1.E+03 Figure 9. Forward voltage drop versus forward current (maximum values) 1.
PAGE 5
STPS1H100 Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SMB package information • • Epoxy meets UL94, V0 Lead-free package Figure 13.
PAGE 6
STPS1H100 SMB package information Table 4. SMB package mechanical data Dimensions Ref. Millimeters Inches (for reference only) Min. Max. Min. Max. A1 1.90 2.45 0.0748 0.0965 A2 0.05 0.20 0.0020 0.0079 b 1.95 2.20 0.0768 0.0867 c 0.15 0.40 0.0059 0.0157 D 3.30 3.95 0.1299 0.1556 E 5.10 5.60 0.2008 0.2205 E1 4.05 4.60 0.1594 0.1811 L 0.75 1.50 0.0295 0.0591 Figure 14. SMB recommended footprint 1.62 2.60 1.62 (0.064) (0.102) (0.064) 2.18 (0.086) 5.84 (0.
PAGE 7
STPS1H100 SMA package information 2.2 SMA package information • • Epoxy meets UL94, V0 Lead-free package Figure 15. SMA package outline E1 D E A1 C L A2 b Table 5. SMA package mechanical data Dimensions Millimeters Ref. DS1228 - Rev 8 Inches Min. Max. Min. Max. A1 1.90 2.45 0.075 0.097 A2 0.05 0.20 0.002 0.008 b 1.25 1.65 0.049 0.065 c 0.15 0.40 0.006 0.016 D 2.25 2.90 0.089 0.114 E 4.80 5.35 0.189 0.211 E1 3.95 4.60 0.156 0.181 L 0.75 1.50 0.030 0.
PAGE 8
STPS1H100 SMA package information Figure 16. SMA recommended footprint in mm (inches) 1.4 2.63 1.4 (0.055) (0.103) (0.055) 1.64 (0.064) 5.43 (0.
PAGE 9
STPS1H100 SMA Flat package information 2.3 SMA Flat package information • • Epoxy meets UL94, V0 Lead-free package Figure 17. SMA Flat package outline A c D L 2x L1 2 x E E1 L L2 2 x b 2x Table 6. SMA Flat package mechanical data Dimensions Ref. Millimeters Min. DS1228 - Rev 8 Typ. Inches (for reference only) Max. Min. Typ. Max. A 0.90 1.10 0.035 0.044 b 1.25 1.65 0.049 0.065 c 0.15 0.40 0.005 0.016 D 2.25 2.95 0.088 0.117 E 4.80 5.60 0.188 0.221 E1 3.95 4.60 0.
PAGE 10
STPS1H100 SMA Flat package information Figure 18. SMA Flat recommended footprint in mm (inches) 5.52 (0.217) 1.52 (0.060) 1.20 (0.047) 3.12 (0.123) 1.20 (0.
PAGE 11
STPS1H100 SMA Flat Notch package information 2.4 SMA Flat Notch package information • • • Epoxy meets UL94, V0 Cooling method: by conduction (C) Band indicates cathode Figure 19. SMA Flat Notch package outline Table 7. SMA Flat Notch package mechanical data Dimensions Ref. Millimeters Min. A1 0.90 A1 Max. Min. 1.10 0.035 0.05 Typ. Max. 0.044 0.002 b 1.25 1.65 0.049 0.065 C 0.15 0.40 0.005 0.016 D 2.25 2.90 0.088 0.115 E 5.00 5.35 0.196 0.211 E1 3.95 4.60 0.155 0.
PAGE 12
STPS1H100 SMA Flat Notch package information Figure 20. SMA Flat Notch recommended footprint in mm (inches) 1.20 (0.047) 3.12 1.20 (0.123) (0.047) 1.52 (0.060) 5.52 (0.
PAGE 13
STPS1H100 Ordering Information 3 Ordering Information Table 8. Ordering information DS1228 - Rev 8 Order code Marking Package Weight Base qty. Delivery mode STPS1H100A S11 SMA 0.068 g 5000 Tape and reel STPS1H100U G11 SMB 0.107 g 2500 Tape and reel STPS1H100AF F11 SMA Flat 0.035 g 10 000 Tape and reel STPS1H100AFN A11 SMA Flat Notch 0.
PAGE 14
STPS1H100 Revision history Table 9. Document revision history DS1228 - Rev 8 Date Version Changes Jul-2003 4A Aug-2004 5 SMA package dimensions update. Reference A1 max changed from 2.70 mm (0.106 inc.) to 2.03 mm (0.080 inc). 18-Sep-2008 6 Reformatted to current standards. Added SMAflat package. 06-Apr-2018 7 Updated Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified), Figure 3. Normalized avalanche power derating versus junction temperature (Tj = 125 °C).
PAGE 15
STPS1H100 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.