Datasheet

Ordering information STM8S105x4/6
110/121 DocID14771 Rev 15
Padding value for unused program memory (check only one option)
OTP0 memory readout protection (check only one option)
[ ] Disable or [ ] Enable
OTP1 user boot code area (UBC)
0x(_ _) fill in the hexadecimal value, referring to the datasheet and the binary format below:
OTP2 alternate function remapping
[ ] 0xFF Fixed value
[ ] 0x83 TRAP instruction code
[ ] 0x75 Illegal opcode (causes a reset when executed)
UBC, bit0
[ ] 0: Reset
[ ] 1: Set
UBC, bit1
[ ] 0: Reset
[ ] 1: Set
UBC, bit2
[ ] 0: Reset
[ ] 1: Set
UBC, bit3
[ ] 0: Reset
[ ] 1: Set
UBC, bit4
[ ] 0: Reset
[ ] 1: Set
UBC, bit5
[ ] 0: Reset
[ ] 1: Set
AFR0
(check only one option)
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port D3 alternate function = ADC_ETR
AFR1
(check only one option)
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port A3 alternate function = TIM3_CH1, port D2 alternate
function = TIM2_CH3
AFR2
(check only one option)
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port D0 alternate function = CLK_CCO
Note: if both AFR2 and AFR3 are activated, AFR2 option has
priority over AFR3.
AFR3
(check only one option)
[ ] 0: Remapping option inactive. Default alternate functions
used. Refer to pinout description
[ ] 1: Port D0 alternate function = TIM1_BKIN