Datasheet

DocID14771 Rev 15 109/121
STM8S105x4/6 Ordering information
115
13.1 STM8S105 FASTROM microcontroller option list
(last update: September 2010)
The preferable format for programing code is .Hex (.s19 is accepted)
If data EEPROM programing is required, a separate file must be sent with the requested
data.
Note: See the option byte section in the datasheet for authorized option byte combinations and a
detailed explanation.
Device type/memory size/package (check only one option)
Conditioning (check only one option)
[ ] Tape and reel or [ ] Tray
Special marking (check only one option)
[ ] No [ ] Yes
Authorized characters are letters, digits, '.', '-', '/' and spaces only. Maximum character
counts are:
LQFP32: 2 lines of 7 characters max: “_ _ _ _ _ _ _” and “_ _ _ _ _ _ _”
LQFP44: 2 lines of 7 characters max: “_ _ _ _ _ _ _” and “_ _ _ _ _ _ _”
LQFP48: 2 lines of 8 characters max: “_ _ _ _ _ _ _ _” and “_ _ _ _ _ _ _ _”
Temperature range
[ ] -40°C to +85°C or [ ] -40°C to +125°C
Customer ...............................................................................
Address ...............................................................................
Contact ...............................................................................
Phone number ...............................................................................
FASTROM code reference
(1)
1. The FASTROM code name is assigned by STMicroelectronics.
...............................................................................
FASTROM device 16 Kbyte 32 Kbyte
LQFP32 [ ] STM8S105K4 [ ] STM8S105K6
LQFP44 [ ] STM8S105S4 [ ] STM8S105S6
LQFP48 [ ] STM8S105C4 [ ] STM8S105C6