Datasheet

STM8S105xx
Electrical characteristics
10.1.5 Loading capacitor
The loading conditions used for pin parameter measurement are shown in the following
figure.
Figure 9: Pin loading conditions
10.1.6 Pin input voltage
The input voltage measurement on a pin of the device is described in the following figure.
Figure 10: Pin input voltage
10.2 Absolute maximum ratings
Stresses above those listed as ‘absolute maximum ratings’ may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 16: Voltage characteristics
Symbol Ratings Min Max Unit
V
DDx
- V
SS
Supply voltage (including V
DDA and
V
DDIO
)
(1)
-0.3 6.5 V
V
IN
Input voltage on true open drain
pins (PE1, PE2)
(2)
V
SS
- 0.3 6.5
Input voltage on any other pin
(2)
V
SS
- 0.3 V
DD
+ 0.3
|V
DDx
- Variations between different power 50 mV
DocID14771 Rev 13 43/99