Datasheet

STM8S105xx
Pinout and pin description
5 Pinout and pin description
Table 5: Legend/abbreviations for pinout tables
Type I= Input, O = Output, S = Power supply
Level
Input CM = CMOS
Output HS = High sink
Output speed
O1 = Slow (up to 2 MHz)
O2 = Fast (up to 10 MHz)
O3 = Fast/slow programmability with slow as default state after reset
O4 = Fast/slow programmability with fast as default state after reset
Port and control
configuration
Input float = floating, wpu = weak pull-up
Output T = True open drain, OD = Open drain, PP = Push pull
Reset state Bold X (pin state after internal reset release).
Unless otherwise specified, the pin state is the same during the reset
phase and after the internal reset release.
5.1 STM8S105 pinouts and pin description
Figure 3: LQFP 48-pin pinout
1. (HS) high sink capability.
2. (T) True open drain (P-buffer and protection diode to V
DD
not implemented).
3. [ ] alternate function remapping option (If the same alternate function is shown twice, it
indicates an exclusive choice not a duplication of the function).
DocID14771 Rev 13 19/99