Datasheet

ManualsBrandsST ManualsEmbedded Processors & ControllersMicrocontroller 32bit 512KB LQFP

DocID028479 Rev 1 9/121

STM32F722xx STM32F723xx Description

1 Description

The STM32F722xx and STM32F723xx devices are based on the high-performance ARM

Cortex

-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex

-M7 core

features a single floating point unit (SFPU) precision which supports ARM

single-precision

data-processing instructions and data types. It also implements a full set of DSP instructions

and a memory protection unit (MPU) which enhances the application security.

The STM32F722xx and STM32F723xx devices incorporate high-speed embedded

memories with a Flash memory up to 512

Kbytes, 256 Kbytes of SRAM (including

Kbytes of data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM

(for critical real-time routines), 4

Kbytes of backup SRAM available in the lowest power

modes, and an extensive range of enhanced I/Os and peripherals connected to two APB

buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect

supporting internal and external memories access.

All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-

purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-

bit timers, a true random number generator (RNG). They also feature standard and

advanced communication interfaces.

• Up to three I

• Five SPIs, three I

Ss in half duplex mode. To achieve the audio class accuracy, the I

peripherals can be clocked via a dedicated internal audio PLL or via an external clock

to allow synchronization.

• Four USARTs plus four UARTs

• An USB OTG full-speed and a USB OTG high-speed with full-speed capability (with the

ULPI in the STM32F722xx devices and with the integrated HS PHY in the

STM32F723xx devices)

• One CAN

• Two SAI serial audio interfaces

• Two SDMMC host interfaces

Advanced peripherals include two SDMMC interfaces, a flexible memory control (FMC)

interface, a Quad-SPI Flash memory interface. Refer to

Table 2: STM32F722xx and

STM32F723xx features and peripheral counts for the list of peripherals available on each

part number.

The STM32F722xx and STM32F723xx devices operate in the –40 to +105 °C temperature

range from a 1.7 to 3.6

V power supply. Dedicated supply inputs for the USB (OTG_FS and

OTG_HS) and the SDMMC2 (clock, command and 4-bit data) are available on all the

packages except LQFP100 and LQFP64 for a greater power supply choice.

The supply voltage can drop to 1.7 V with the use of an external power supply supervisor

(refer to

Section 2.15.2: Internal reset OFF). A comprehensive set of power-saving mode

allows the design of low-power applications.

The STM32F722xx and STM32F723xx devices offer devices in 7 packages ranging from 64

pins to 176 pins. The set of included peripherals changes with the device chosen.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.