Datasheet

List of tables STM32F412xE/G
6/193 DocID028087 Rev 4
List of tables
Table 1. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table 2. STM32F412xE/G features and peripheral counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 3. Embedded bootloader interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Table 4. Regulator ON/OFF and internal power supply supervisor availability. . . . . . . . . . . . . . . . . 31
Table 5. Timer feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Table 6. Comparison of I2C analog and digital filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Table 7. USART feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table 8. Legend/abbreviations used in the pinout table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Table 9. STM32F412xE/G pin definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Table 10. STM32F412xE/G alternate functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Table 11. STM32F412xE/G register boundary addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Table 12. Voltage characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Table 13. Current characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Table 14. Thermal characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Table 15. General operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Table 16. Features depending on the operating power supply range . . . . . . . . . . . . . . . . . . . . . . . . 78
Table 17. VCAP_1/VCAP_2 operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table 18. Operating conditions at power-up / power-down (regulator ON) . . . . . . . . . . . . . . . . . . . . 79
Table 19. Operating conditions at power-up / power-down (regulator OFF). . . . . . . . . . . . . . . . . . . . 80
Table 20. Embedded reset and power control block characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 80
Table 21. Typical and maximum current consumption, code with data processing (ART
accelerator disabled) running from SRAM - V
DD
= 1.7 V . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Table 22. Typical and maximum current consumption, code with data processing (ART
accelerator disabled) running from SRAM - V
DD
= 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Table 23. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled except prefetch) running from Flash memory- V
DD
= 1.7 V. . . 84
Table 24. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled except prefetch) running from Flash memory - V
DD
= 3.6 V . . 85
Table 25. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator disabled) running from Flash memory - V
DD
= 3.6 V. . . . . . . . . . . . . . . 86
Table 26. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator disabled) running from Flash memory - V
DD
= 1.7 V. . . . . . . . . . . . . . . 87
Table 27. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled with prefetch) running from Flash memory - V
DD
= 3.6 V . . . . . 88
Table 28. Typical and maximum current consumption in Sleep mode - V
DD
= 3.6 V . . . . . . . . . . . . . 89
Table 29. Typical and maximum current consumption in Sleep mode - V
DD
= 1.7 V . . . . . . . . . . . . . 90
Table 30. Typical and maximum current consumptions in Stop mode - V
DD
= 1.7 V . . . . . . . . . . . . . 91
Table 31. Typical and maximum current consumption in Stop mode - V
DD
=3.6 V. . . . . . . . . . . . . . . 92
Table 32. Typical and maximum current consumption in Standby mode - V
DD
= 1.7 V . . . . . . . . . . . 92
Table 33. Typical and maximum current consumption in Standby mode - V
DD
= 3.6 V . . . . . . . . . . . 92
Table 34. Typical and maximum current consumptions in V
BAT
mode. . . . . . . . . . . . . . . . . . . . . . . . 93
Table 35. Switching output I/O current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Table 36. Peripheral current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Table 37. Low-power mode wakeup timings
(1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Table 38. High-speed external user clock characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Table 39. Low-speed external user clock characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Table 40. HSE 4-26 MHz oscillator characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Table 41. LSE oscillator characteristics (f
LSE
= 32.768 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.