Datasheet

ManualsBrandsST ManualsEmbedded Processors & ControllersMicrocontroller 32bit 512KB LQFP

List of tables STM32F411xC STM32F411xE

6/149 DocID026289 Rev 6

List of tables

Table 1. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Table 2. STM32F411xC/xE features and peripheral counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Table 3. Regulator ON/OFF and internal power supply supervisor availability. . . . . . . . . . . . . . . . . 25

Table 4. Timer feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Table 5. Comparison of I2C analog and digital filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Table 6. USART feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Table 7. Legend/abbreviations used in the pinout table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Table 8. STM32F411xC/xE pin definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Table 9. Alternate function mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Table 10. STM32F411xC/xE

register boundary addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Table 11. Voltage characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Table 12. Current characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Table 13. Thermal characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Table 14. General operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Table 15. Features depending on the operating power supply range . . . . . . . . . . . . . . . . . . . . . . . . 63

Table 16. VCAP_1/VCAP_2 operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Table 17. Operating conditions at power-up / power-down (regulator ON) . . . . . . . . . . . . . . . . . . . . 65

Table 18. Operating conditions at power-up / power-down (regulator OFF). . . . . . . . . . . . . . . . . . . . 65

Table 19. Embedded reset and power control block characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 66

Table 20. Typical and maximum current consumption, code with data processing (ART

accelerator disabled) running from SRAM - V

= 1.7 V . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Table 21. Typical and maximum current consumption, code with data processing (ART

accelerator disabled) running from SRAM - V

= 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Table 22. Typical and maximum current consumption in run mode, code with data processing

(ART accelerator enabled except prefetch) running from Flash memory- V

= 1.7 V. . . 70

Table 23. Typical and maximum current consumption in run mode, code with data processing

(ART accelerator enabled except prefetch) running from Flash memory - V

= 3.6 V . . 71

Table 24. Typical and maximum current consumption in run mode, code with data processing

(ART accelerator disabled) running from Flash memory - V

= 3.6 V. . . . . . . . . . . . . . . 72

Table 25. Typical and maximum current consumption in run mode, code with data processing

(ART accelerator enabled with prefetch) running from Flash memory - V

= 3.6 V . . . . . 73

Table 26. Typical and maximum current consumption in Sleep mode - V

= 3.6 V . . . . . . . . . . . . . 74

Table 27. Typical and maximum current consumptions in Stop mode - V

= 1.7 V . . . . . . . . . . . . . 74

Table 28. Typical and maximum current consumption in Stop mode - V

=3.6 V. . . . . . . . . . . . . . . 75

Table 29. Typical and maximum current consumption in Standby mode - V

= 1.7 V . . . . . . . . . . . 75

Table 30. Typical and maximum current consumption in Standby mode - V

= 3.6 V . . . . . . . . . . . 75

Table 31. Typical and maximum current consumptions in V

BAT

mode. . . . . . . . . . . . . . . . . . . . . . . . 76

Table 32. Switching output I/O current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Table 33. Peripheral current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Table 34. Low-power mode wakeup timings

(1)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Table 35. High-speed external user clock characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Table 36. Low-speed external user clock characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Table 37. HSE 4-26 MHz oscillator characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Table 38. LSE oscillator characteristics (f

LSE

= 32.768 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Table 39. HSI oscillator characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Table 40. LSI oscillator characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Table 41. Main PLL characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.