Datasheet

List of tables STM32F410x8/B
6/142 DocID028094 Rev 5
List of tables
Table 1. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table 2. STM32F410x8/B features and peripheral counts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 3. Embedded bootloader interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table 4. Regulator ON/OFF and internal power supply supervisor availability. . . . . . . . . . . . . . . . . 22
Table 5. Timer feature comparison. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Table 6. Comparison of I2C analog and digital filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Table 7. USART feature comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 8. Legend/abbreviations used in the pinout table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Table 9. STM32F410x8/B pin definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Table 10. Alternate function mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Table 11. STM32F410x8/B register boundary addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Table 12. Voltage characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Table 13. Current characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Table 14. Thermal characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Table 15. General operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Table 16. Features depending on the operating power supply range . . . . . . . . . . . . . . . . . . . . . . . . 55
Table 17. VCAP_1 operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Table 18. Operating conditions at power-up / power-down (regulator ON) . . . . . . . . . . . . . . . . . . . . 56
Table 19. Operating conditions at power-up / power-down (regulator OFF). . . . . . . . . . . . . . . . . . . . 56
Table 20. Embedded reset and power control block characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 57
Table 21. Typical and maximum current consumption, code with data processing (ART
accelerator disabled) running from SRAM - V
DD
= 1.7 V . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Table 22. Typical and maximum current consumption, code with data processing (ART
accelerator disabled) running from SRAM - V
DD
= 3.6 V . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Table 23. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled except prefetch) running from Flash memory- V
DD
= 1.7 V. . . 61
Table 24. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled except prefetch) running from Flash memory - V
DD
= 3.6 V . . 62
Table 25. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator disabled) running from Flash memory - V
DD
= 3.6 V. . . . . . . . . . . . . . . 63
Table 26. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator disabled) running from Flash memory - V
DD
= 1.7 V. . . . . . . . . . . . . . . 64
Table 27. Typical and maximum current consumption in run mode, code with data processing
(ART accelerator enabled with prefetch) running from Flash memory - V
DD
= 3.6 V . . . . . 65
Table 28. Typical and maximum current consumption in Sleep mode - V
DD
= 3.6 V . . . . . . . . . . . . . 66
Table 29. Typical and maximum current consumption in Sleep mode - V
DD
= 1.7 V . . . . . . . . . . . . . 68
Table 30. Typical and maximum current consumptions in Stop mode - V
DD
= 1.7 V . . . . . . . . . . . . . 70
Table 31. Typical and maximum current consumption in Stop mode - V
DD
=3.6 V. . . . . . . . . . . . . . . 70
Table 32. Typical and maximum current consumption in Standby mode - V
DD
= 1.7 V . . . . . . . . . . . 70
Table 33. Typical and maximum current consumption in Standby mode - V
DD
= 3.6 V . . . . . . . . . . . 71
Table 34. Typical and maximum current consumptions in V
BAT
mode
(LSE and RTC ON, LSE low- drive mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Table 35. Switching output I/O current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Table 36. Peripheral current consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Table 37. Low-power mode wakeup timings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Table 38. High-speed external user clock characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table 39. Low-speed external user clock characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Table 40. HSE 4-26 MHz oscillator characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.