Datasheet

Electrical characteristics STM32F105xx, STM32F107xx
60/108 DocID15274 Rev 10
Output driving current
The GPIOs (general purpose input/outputs) can sink or source up to +/-8 mA, and sink or
source up to +/-20 mA (with a relaxed V
OL
/V
OH
).
In the user application, the number of I/O pins which can drive current must be limited to
respect the absolute maximum rating specified in Section 5.2:
• The sum of the currents sourced by all the I/Os on V
DD,
plus the maximum Run
consumption of the MCU sourced on V
DD,
cannot exceed the absolute maximum rating
I
VDD
(see Table 7).
• The sum of the currents sunk by all the I/Os on V
SS
plus the maximum Run
consumption of the MCU sunk on V
SS
cannot exceed the absolute maximum rating
I
VSS
(see Table 7).
Output voltage levels
Unless otherwise specified, the parameters given in Table 37 are derived from tests
performed under ambient temperature and V
DD
supply voltage conditions summarized in
Table 9. All I/Os are CMOS and TTL compliant.
Table 37. Output voltage characteristics
Symbol Parameter Conditions Min Max Unit
V
OL
(1)
1. The I
IO
current sunk by the device must always respect the absolute maximum rating specified in Table 7
and the sum of I
IO
(I/O ports and control pins) must not exceed I
VSS
.
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
TTL port
I
IO
= +8 mA
2.7 V < V
DD
< 3.6 V
- 0.4
V
V
OH
(2)
2. The I
IO
current sourced by the device must always respect the absolute maximum rating specified in
Table 7 and the sum of I
IO
(I/O ports and control pins) must not exceed I
VDD
.
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
V
DD
–0.4 -
V
OL
(1)
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
CMOS port
I
IO
=+ 8mA
2.7 V < V
DD
< 3.6 V
- 0.4
V
V
OH
(2)
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
2.4 -
V
OL
(1)(3)
3. Based on characterization data, not tested in production.
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
I
IO
= +20 mA
2.7 V < V
DD
< 3.6 V
- 1.3
V
V
OH
(2)(3)
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
V
DD
–1.3 -
V
OL
(1)(3)
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
I
IO
= +6 mA
2 V < V
DD
< 2.7 V
- 0.4
V
V
OH
(2)(3)
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
V
DD
–0.4 -
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.