Datasheet

STM32F103x8, STM32F103xB Revision history
83/84
21-Jul-2008 8
Power supply supervisor updated and V
DDA
added to Ta bl e 8 : G e n e ra l
operating conditions.
Capacitance modified in Figure 11: Power supply scheme on page 29.
Table notes revised in Section 5: Electrical characteristics.
Table 15: Typical and maximum current consumptions in Stop and
Standby modes modified.
Data added to Table 15: Typical and maximum current consumptions in
Stop and Standby modes and Table 21: Typical current consumption in
Standby mode removed.
f
HSE_ext
modified in Table 19: High-speed external user clock
characteristics on page 43. f
PLL_IN
modified in Table 26: PLL
characteristics on page 48.
Minimum SDA and SCL fall time value for Fast mode removed from
Table 38: I2C characteristics on page 57, note 1 modified.
t
h(NSS)
modified in Table 40: SPI characteristics on page 59 and
Figure 25: SPI timing diagram - slave mode and CPHA = 0 on page 60.
C
ADC
modified in Table 44: ADC characteristics on page 63 and
Figure 30: Typical connection diagram using the ADC modified.
Typical T
S_temp
value removed from Table 48: TS characteristics on
page 67.
LQFP48 package specifications updated (see Ta bl e 53 and Ta bl e 4 2 ),
Section 6: Package characteristics revised.
Axx option removed from Table 55: Ordering information scheme on
page 78.
Small text changes.
22-Sep-2008 9
STM32F103x6 part numbers removed (see Table 55: Ordering
information scheme). Small text changes.
General-purpose timers (TIMx) and Advanced-control timer (TIM1) on
page 14 updated.
Notes updated in Table 4: Medium-density STM32F103xx pin
definitions on page 22.
Note 2 modified below Table 5: Voltage characteristics on page 30,
|ΔV
DDx
| min and |ΔV
DDx
| min removed.
Measurement conditions specified in Section 5.3.5: Supply current
characteristics on page 34.
I
DD
in standby mode at 85 °C modified in Table 15: Typical and
maximum current consumptions in Stop and Standby modes on
page 38.
General input/output characteristics on page 52 modified.
f
HCLK
conditions modified in Table 29: EMS characteristics on page 50.
Θ
JA
and pitch value modified for LFBGA100 package in Table 54:
Thermal characteristics. Small text changes.
Table 56. Document revision history (continued)
Date Revision Changes