Datasheet

Electrical characteristics STM32F103x4, STM32F103x6

42/99 DocID15060 Rev 7

Figure 18. Typical current consumption in Standby mode versus temperature at

= 3.3 V and 3.6 V

Typical current consumption

The MCU is placed under the following conditions:

• All I/O pins are in input mode with a static value at V

or V

(no load).

• All peripherals are disabled except if it is explicitly mentioned.

• The

Flash access time is adjusted to f

HCLK

frequency (0 wait state from 0 to 24 MHz, 1

wait state from 24 to 48 MHz and 2 wait states above).

• Ambient temperature and V

supply voltage conditions summarized in Table 9.

• Prefetch is ON (Reminder: this bit must be set before clock setting and bus prescaling)

• When the peripherals are enabled f

PCLK1

= f

HCLK

/4, f

PCLK

2 = f

HCLK

/2, f

ADCCLK

PCLK2