Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsMOSFET, N-Channel, 800V, 2.5A, 25W, TO-220FP

April 2017

DocID9565 Rev 7

1/29

This is information on a product in full production.

www.st.com

STD3NK80Z-1, STD3NK80ZT4,

STF3NK80Z, STP3NK80Z

N-channel 800 V, 3.8 Ω typ., 2.5 A SuperMESH™

Power MOSFETs in IPAK, DPAK, TO-220FP, TO-220 packages

Datasheet - production data

Figure 1: Internal schematic diagram

Features

Order code

DS(on) max.

STD3NK80Z-1

800 V

4.5 Ω

2.5 A

STD3NK80ZT4

800 V

4.5 Ω

2.5 A

STF3NK80Z

800 V

4.5 Ω

2.5 A

STP3NK80Z

800 V

4.5 Ω

2.5 A

 Extremely high dv/dt capability

 100% avalanche tested

 Gate charge minimized

 Zener-protected

Applications

 Switching applications

Description

These high voltage devices are Zener-protected

N-channel Power MOSFETs developed using the

SuperMESH™ technology by

STMicroelectronics, an optimization of the

well-established PowerMESH™. In addition to a

significant reduction in on-resistance, these

devices are designed to ensure a high level of

dv/dt capability for the most demanding

applications. Such series complements ST's full

range of high voltage MOSFETs including the

revolutionary MDmesh™ products.

Table 1: Device summary

Order code

Marking

Package

Packaging

STD3NK80Z-1

D3NK80Z

IPAK

Tube

STD3NK80ZT4

D3NK80Z

DPAK

Tape and reel

STF3NK80Z

F3NK80Z

TO-220FP

Tube

STP3NK80Z

P3NK80Z

TO-220

Tube

Summary of content (29 pages)

PAGE 1
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z N-channel 800 V, 3.8 Ω typ., 2.5 A SuperMESH™ Power MOSFETs in IPAK, DPAK, TO-220FP, TO-220 packages Datasheet - production data Features     Order code VDS RDS(on) max. ID STD3NK80Z-1 800 V 4.5 Ω 2.5 A STD3NK80ZT4 800 V 4.5 Ω 2.5 A STF3NK80Z 800 V 4.5 Ω 2.5 A STP3NK80Z 800 V 4.5 Ω 2.
PAGE 2
Contents STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Contents 1 Electrical ratings ............................................................................. 3 2 Electrical characteristics ................................................................ 4 2.1 Electrical characteristics (curves) ...................................................... 6 3 Test circuits ..................................................................................... 9 4 Package information .................
PAGE 3
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z 1 Electrical ratings Electrical ratings Table 2: Absolute maximum ratings Value Symbol TO-220, DPAK, IPAK Parameter Unit TO-220FP VDS Drain-source voltage 800 VGS Gate-source voltage ±30 Drain current (continuous) at TC = 100 °C V 2.5 2.5(1) A 1.57 1.57(1) A A W Drain current (continuous) at TC = 25 °C ID V IDM(2) Drain current (pulsed) 10 10(1) PTOT Total dissipation at TC = 25 °C 70 25 ESD Gate-source, human body model, R = 1.
PAGE 4
Electrical characteristics 2 STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Electrical characteristics (TC = 25 °C unless otherwise specified) Table 5: On /off states Symbol V(BR)DSS Parameter Test conditions Drain-source breakdown voltage VGS = 0 V, ID = 1 mA Min. Typ. Max. 800 Unit V VGS = 0 V, VDS = 800 V 1 µA VGS = 0 V, VDS = 800 V, TC = 125 °C(1) 50 µA ±10 µA 3.75 4.5 V 3.8 4.5 Ω Min. Typ. Max.
PAGE 5
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Electrical characteristics Table 8: Source drain diode Symbol Parameter Test conditions Min. Typ. Max. Unit ISD Source-drain current - 2.5 A ISDM(1) Source-drain current (pulsed) - 10 A VSD(2) Forward on voltage ISD = 2.5 A, VGS = 0 V - 1.6 V trr Reverse recovery time - 384 ns Qrr Reverse recovery charge - 1.6 μC IRRM Reverse recovery current ISD = 2.
PAGE 6
Electrical characteristics 2.1 STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Electrical characteristics (curves) Figure 2: Safe operating area for TO-220, DPAK, IPAK Figure 3: Thermal impedance for TO-220, DPAK, IPAK CG20930 K δ = 0.5 δ = 0.2 δ = 0.1 10-1 Z Zthth == kk R Rthj-C thj-C δδ == ttp // Ƭ Ƭ p δ = 0.05 δ = 0.02 δ = 0.
PAGE 7
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Electrical characteristics Figure 8: Static drain-source on-resistance Figure 9: Gate charge vs. gate-source voltage Figure 10: Capacitance variations Figure 11: Normalized gate threshold voltage vs. temperature Figure 12: Normalized on-resistance vs.
PAGE 8
Electrical characteristics STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Figure 14: Normalized V(BR)DSS vs. temperature 8/29 Figure 15: Maximum avalanche energy vs.
PAGE 9
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z 3 Test circuits Test circuits Figure 16: Test circuit for resistive load switching times Figure 17: Test circuit for gate charge behavior Figure 18: Test circuit for inductive load switching and diode recovery times Figure 19: Unclamped inductive load test circuit Figure 20: Unclamped inductive waveform Figure 21: Switching time waveform DocID9565 Rev 7 9/29
PAGE 10
Package information 4 STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4.
PAGE 11
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Table 10: IPAK (TO-251) type A package mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 b4 0.95 5.20 B5 5.40 0.30 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H 4.60 16.10 L 9.00 9.40 L1 0.80 1.20 L2 0.80 V1 10° DocID9565 Rev 7 1.
PAGE 12
Package information STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z 4.2 DPAK package information 4.2.
PAGE 13
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Table 11: DPAK (TO-252) type A mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.16 2.28 2.40 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 5.10 5.25 6.60 1.00 0.
PAGE 14
Package information STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Figure 24: DPAK (TO-252) type A recommended footprint (dimensions are in mm) 14/29 DocID9565 Rev 7
PAGE 15
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z 4.2.
PAGE 16
Package information STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Table 12: DPAK (TO-252) type C2 mechanical data mm Dim. Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.10 E 6.50 E1 5.20 e 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 6.20 5.60 6.60 6.70 5.50 0.90 1.25 0.51 BSC 0.60 L6 16/29 6.10 5.46 2.90 REF L3 L4 5.33 0.80 1.00 1.
PAGE 17
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Figure 26: DPAK (TO-252) type C2 recommended footprint (dimensions are in mm) FP_0068772_22 DocID9565 Rev 7 17/29
PAGE 18
Package information 4.2.
PAGE 19
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Table 13: DPAK (TO-252) type E mechanical data mm Dim. Min. A Typ. 2.18 Max. 2.39 A2 0.13 b 0.65 0.884 b4 4.95 5.46 c 0.46 0.61 c2 0.46 0.60 D 5.97 6.22 D1 5.21 E 6.35 E1 4.32 6.73 e 2.286 e1 4.572 H 9.94 10.34 L 1.50 1.78 L1 L2 2.74 0.89 L4 1.27 1.
PAGE 20
Package information 4.2.
PAGE 21
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Figure 30: DPAK (TO-252) reel outline Table 14: DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID9565 Rev 7 18.
PAGE 22
Package information 4.
PAGE 23
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Table 15: TO-220FP package mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.
PAGE 24
Package information STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z 4.4 TO-220 package information 4.4.
PAGE 25
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Table 16: TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 D1 15.75 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.
PAGE 26
Package information 4.4.
PAGE 27
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Package information Table 17: TO-220 type H package mechanical data mm Dim. Min. Typ. Max. A 4.40 4.45 4.50 A1 1.22 A2 2.49 2.59 2.69 A3 1.17 1.27 1.37 1.32 b 0.78 0.87 b2 1.25 1.34 b4 1.20 1.29 b6 1.50 b7 1.45 c 0.49 D 15.40 15.50 15.60 D1 9.05 9.15 9.25 E 10.08 10.18 10.28 e 2.44 2.54 2.64 e1 4.98 5.08 5.18 H1 6.25 6.35 6.45 L 13.20 13.40 13.60 L1 3.50 3.70 3.90 L2 16.30 16.40 16.
PAGE 28
Revision history 5 STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z Revision history Table 18: Document revision history 28/29 Date Revision Changes 09-Sep-2004 3 Complete document 10-Aug-2006 4 New template, no content change 26-Feb-2009 5 Updated mechanical data 07-Sep-2009 6 VESD(G-S) value has been corrected 06-Apr-2017 7 Updated Section 1: "Electrical ratings", Section 2: "Electrical characteristics" and Section 4: "Package information".
PAGE 29
STD3NK80Z-1, STD3NK80ZT4, STF3NK80Z, STP3NK80Z IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.